Download Additives in polymers: industrial analysis and applications by Jan C. J. Bart PDF

By Jan C. J. Bart

ISBN-10: 0470850620

ISBN-13: 9780470850626

This industrially suitable source covers all proven and rising analytical equipment for the deformulation of polymeric fabrics, with emphasis at the non-polymeric elements.

  • Each procedure is evaluated on its technical and commercial advantages.
  • Emphasis is on knowing (principles and features) and commercial applicability.
  • Extensively illustrated all through with over 2 hundred figures, four hundred tables, and 3,000 references.

Show description

Read Online or Download Additives in polymers: industrial analysis and applications PDF

Similar plastics books

Compounding Precipitated Silica in Elastomers: Theory and Practice

This worthy advisor to compounding elastomers with induced silica covers rules, houses, blending, checking out and formulations from a pragmatic viewpoint. This instruction manual and reference handbook will serve those that paintings on half layout, elastomer formula, production and functions of elastomers.

Metallized Plastics 3: Fundamental and Applied Aspects

This quantity chronicles the court cases of the 3rd Symposium on Metallized Plastics: primary and utilized features held below the auspices of the Dielectric technological know-how and expertise department of the Electrochemical Society in Phoenix, Arizona, October 13-18, 1991. This sequence of symposia to handle the topic of metallized plastics was once initiated in 1988 and the prime symposium used to be held in Chicago, October 10-12, 1988, via the second one occasion in Montreal, Canada, may well 7-10, 1990.

Computer Modeling for Injection Molding: Simulation, Optimization, and Control

This e-book covers a variety of functions and makes use of of simulation and modeling thoughts in polymer injection molding, filling a seen hole within the literature of layout, production, and using plastics injection molding. The authors support readers resolve difficulties within the complicated keep watch over, simulation, tracking, and optimization of injection molding techniques.

Chemical Resistance of Specialty Thermoplastics

Whereas the two-volume paintings Chemical Resistance of Thermoplastics covers chemical resistance of high-volume advertisement (commodity) thermoplastics, this quantity makes a speciality of excessive functionality 'engineering' or 'specialty' thermoplastics. those thermoplastics are typically fed on in smaller volumes, yet have fascinating features for challenging and high-value functions.

Extra info for Additives in polymers: industrial analysis and applications

Example text

K¨ampf, Characterization of Plastics by Physical Methods, Hanser Gardner, Cincinnati, OH (1986). 58. J. Scheirs, Compositional and Failure Analysis of Polymers. A Practical Approach, John Wiley & Sons, Ltd, Chichester (2000). 59. W. Gooch, Analysis and Deformulation of Polymeric Materials, Paints, Plastics, Adhesives and Inks, Plenum Press, New York, NY (1997). 60. G. Lawson, Chemical Analysis of Polymers, Rapra Review Report No. 47 , Rapra Technology Ltd, Shawbury (1991). 61. H. Ostromow, Analyse von Kautschuken und Elastomeren, Springer-Verlag, Berlin (1981).

High-throughput NIRS with InGaAs detection and PCA analysis has been proposed for on-line identification of post-consumer packages of different polymers (PE, PET, PP, PS, PVC) on an industrial conveyer belt [25]. Near-infrared using an acousto-optical tuneable filter (AOTF) can distinguish in real-time between the chemical signatures of over 30 types of plastic with a reported 100 % success rate [26]. Advantages of the NIR spectral range compared to midIR are: NIR photodetectors like Ge, InAs or InGaAs photodiodes with fast response and higher detectivity, and quartz fibre optics with low attenuation.

Crompton, Analysis of Polymers. An Introduction, Pergamon Press, Oxford (1989). 25 53. J. ), Applied Polymer Analysis and Characterization, Recent Developments in Techniques, Instrumentation, Problem Solving, Hanser Publishers, Munich (1987). 54. J. A. M. Squirrell, Identification and Analysis of Plastics, John Wiley & Sons, Ltd, Chichester (1983, and earlier editions). 55. E. Schr¨oder, J. Franz and E. Hagen, Ausgew¨ahlte Methoden zur Plastanalytik, Akademie Verlag, Berlin (1976), p. 31. 56. D.

Download PDF sample

Rated 4.61 of 5 – based on 34 votes